Product Code: BRI Si
Brighton Si LED Flood Light is best for…
- Warehouses, Factories and Workshops
- Tennis, Padel, Swimming Pools and Sports Halls
Not sure the BRIGHTON Si is right for you? Give us a call to discuss your requirements.
BRIGHTON Si LED flood light – extreme performance
The Brighton Si LED flood light is a highly flexible modular lighting system. It can be configured as a low bay, high bay or flood light, depending on your application.
The Brighton Si LED flood light is a highly efficient lighting unit, reducing energy costs and helping you to achieve your carbon reduction targets. And, with a design life of over 60,000 hours, you’ll save on maintenance costs too – particularly if lighting is located in hard-to-reach areas high above the ground.
The Brighton Si uses up to 4 LED modules and has a programmable/dimmable driver to ensure it can be optimally configured to balance cost with efficiency.
If more light is required units can be joined.
Good to know – with a range of modules and drivers the Brighton Si can be configured to exact requirements.
Earlsmann manufacture in the UK to ensure reliability and quality.
|Low power consumption – Reduced energy bills, reduced CO|
|Minimal maintenance – Lower running costs|
|Minimal heat production – Savings in air-con maintenance costs|
|Instant start, full brightness at turn on – Improved safety|
|Colour Temperature||NW 4000K|
|Efficacy||up to 130lm/W (at 50W)|
|Colour Rendering Index||> 80Ra|
|Markings||CE , RoHS|
|Body||Powder Coated Steel|
|LED life*||60000 hours L70|
|Power factor||>0.95 (full power)|
|Ambient temp.||-25 C / + 45 o o|
|Dimensions||350mm x 350mm x 200mm|
|Weight||up to 10kg depending on model|
|Configuration High bay||HB, Low bay: LB, Flood: FL|
|Beam Angle||Asymmetric, regular|
|Sensors||Microwave, preset, daylight dimming|
|Model||Total W (max)||Output (Lm – up to)|