LED anti-corrosive fitting

Product Code: PORS

Portsmouth S anti-corrosive LED fittings are best for…

Car parks
Tunnels and walkways
Warehousing and loading bays
Cold stores and freezer rooms

Portsmouth S – the popular anti-corrosive LED fitting

Our Portsmouth S range of anti-corrosive LED fittings has been updated to meet the latest ECA requirements, >105lm/W. They are purpose built to support the most popular sizes used in industrial environments – from warehouses and loading bays to car parks, walkways and swimming pools. Available in 4ft, 5ft and 6ft all units are IP65 sealed and suitable for exterior or interior use.

The fittings comprise a tough polycarbonate body and an opal diffuser. Each unit can be surface-mounted or suspended, and has knockout holes at each end for wiring. They are fitted with lockable, tamper resistant, stainless clipsas standard.

Optional stainless 316 are available for marine/chlorine environments.

Emergency and sensor versions are available.

Good to know: The Portsmouth S anti-corrosive LED fittings are designed for purpose and are ECA compliant.

Benefit from…

Instant start, full brightness at turn on – Improved safety
Long life, reduced maintenance – Lower running costs
Low power consumption – Reduced energy bills, reduced CO2

More Information

Specifications

Sealing IP65
Voltage 220-240V 50/60Hz
Markings CE, ROHS
Colour temp 4000K
Housing Polycarbonate
Diffuser Polycarbonate (opal)
Clips Stainless steel 304
Power factor >0.90
Ambient temp -20/+45
Efficacy >110 lm/W

Down load a data sheet for the full spec